LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission - C59 >> Back-Up Light Switch >> Inspection

Back-Up Light Switch: Inspection

  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance of the switch.

      Standard Resistance 

      STANDARD RESISTANCE

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Released 10 kΩ or higher

      If the result is not as specified, replace the back-up light switch assembly.

      Fig 1: Measuring Resistance Of Back-Up Light Switch
      G06012707Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals