Front Seat Inner Belt Assembly: Installation

INSTALL FRONT SEAT INNER BELT ASSEMBLY
1. Install the front seat inner belt assembly with the nut.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
2. Connect each connector and clamp.
Fig 1: Identifying Front Seat Inner Belt Assembly With Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SEAT ASSEMBLY (See INSTALLATION )
INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (See INSTALLATION )
INSTALL INNER SEAT TRACK COVER (See INSTALLATION )
INSTALL INNER SEAT TRACK COVER (for 4WD RH Side) (See INSTALLATION )
INSTALL OUTER SEAT TRACK COVER (See INSTALLATION )
INSTALL FRONT SEAT HEADREST ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)
INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)
(See DIAGNOSIS SYSTEM )