LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Seat Position Sensor >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (See DTC CHECK / CLEAR ).
  2. INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (See DTC CHECK / CLEAR ).
    2. Even if an airbag was not deployed, check if there is any damage to the seat position sensor. If there are any following defects, replace the seat position sensor with a new one:
      • Cracks, dents or chips on the sensor housing.
      • Cracks or other damage to the connector.
    CAUTION: Be sure to follow the correct removal and installation procedures for the seat position sensor.
scientia non olet · About LEMON Manuals