Park / Neutral Position Switch: Inspection

WARNING: This page is about a different variant/trim than selected.

INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying Park/Neutral Position Switch Connector Terminal

G06011489

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

RESISTANCE REFERENCE

Tester Connection	Switch Condition	Specified Connection
2 - 6 and 4 - 5	P	Below 1 Ω
2 - 6 and 4 - 5	Except P	10 kΩ or higher
2 - 1	R	Below 1 Ω
2 - 1	Except R	10 kΩ or higher
2 - 9 and 4 - 5	N	Below 1 Ω
2 - 9 and 4 - 5	Except N	10 kΩ or higher
2 - 7	D and 3	Below 1 Ω
2 - 7	Except D and 3	10 kΩ or higher
2 - 3	2	Below 1 Ω
2 - 3	Except 2	10 kΩ or higher
2 - 8	L	Below 1 Ω
2 - 8	Except L	10 kΩ or higher

If the resistance value is not as specified, replace the park/neutral position switch.