LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - U250E) >> Speed Sensor >> Inspection

Speed Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SPEED SENSOR NT 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the resistance value is not as specified, replace the speed sensor.

      Fig 1: Identifying Speed Sensor Connector
      G06011431Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPEED SENSOR NC 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the resistance value is not as specified, replace the speed sensor.