Back-Up Light Switch: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT BACK-UP LIGHT SWITCH ASSEMBLY
- Measure the resistance of the switch.
Standard Resistance
STANDARD RESISTANCE
| Tester Connection |
Switch Condition |
Specified Condition |
| 1 - 2 |
Pushed |
Below 1 Ω |
| 1 - 2 |
Released |
10 kΩ or higher |
If the result is not as specified, replace the switch assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002