Oil Pump: Disassembly

WARNING: This page is about a different variant/trim than selected.

INSPECT OIL PUMP ASSEMBLY (See INSPECTION )
REMOVE CLUTCH DRUM OIL SEAL RING
1. Remove the 2 clutch drum oil seal rings.
Fig 1: Identifying Clutch Drum Oil Seal Rings
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STATOR SHAFT ASSEMBLY
1. Using a T30 "TORX" socket wrench, remove the 11 bolts and stator shaft. Keep the bolts in the order they are removed.
INSPECT CLEARANCE OF OIL PUMP ASSEMBLY (See INSPECTION )

Fig 2: Locating Stator Shaft Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVE GEAR
1. Remove the front oil pump drive gear.
Fig 3: Locating Front Oil Pump Drive Gear
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVEN GEAR
1. Remove the front oil pump driven gear.
Fig 4: Locating Front Oil Pump Driven Gear
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP BODY O-RING
1. Using a screwdriver, pry out the O-ring.
  HINT:
  
  Tape the screwdriver before use.
  
  Fig 5: Removing Front Oil Pump Body O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP OIL SEAL
1. Mount the oil pump in a soft jaw vise.
2. Using SST, tap out the oil seal from the oil pump body.
  SST 09308-00010
INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY (See INSPECTION )
INSPECT STATOR SHAFT ASSEMBLY (See INSPECTION )

Fig 6: Removing Front Oil Pump Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002