Oil Pump: Reassembly

1. INSTALL OIL PUMP COVER SUB-ASSEMBLY 
   1. Coat the oil pump drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side.
   Fig 1: Identifying Oil Pump Cover Marks
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the oil pump cover with the 5 bolts.

   Torque: 8.8 N*m (90 kgf*cm, 78 in.*lbf) 

   Fig 2: Locating Oil Pump Cover Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL OIL PUMP RELIEF VALVE 
   1. Coat the relief valve with engine oil.
   2. Insert the relief valve and spring into the pump body hole.
   3. Using a 27 mm socket wrench, install the plug.

Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf) 

Fig 3: Identifying Valve Spring And Relief Valve

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002