LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (2ZR-FE) >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

      2. Adhesive: 

      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent 

      Fig 1: Applying Adhesive On Threads Of Oil Pressure Switch
      G05193399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 24 mm deep socket wrench, install the oil pressure switch.

      Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf) 

      NOTE: Do not start the engine for at least 1 hour after installation.
    3. Connect the oil pressure switch connector.
    Fig 2: Installing Oil Pressure Switch
    G06009474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT FOR OIL LEAK 
  3. INSTALL FRONT WHEEL RH 
scientia non olet · About LEMON Manuals