LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (2ZR-FE) >> Oil Pressure Switch >> Inspection

Oil Pressure Switch: Inspection

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Start the engine.
      Fig 1: Removing Oil Pressure Switch
      G06009463Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Measure the resistance according to the value(s) in the table below.
      Fig 2: Checking Engine Oil Pressure Switch Resistance
      G05640116Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance 

      RESISTANCE SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      1 - Switch body Engine stopped Below 1 Ω
    4. Reconnect the oil pressure switch connector. If the result is not as specified, replace the oil pressure switch assembly.
scientia non olet · About LEMON Manuals