How To Proceed With Troubleshooting

HINT:

• Use the following procedure to troubleshoot the lighting system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK 
3. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding to the next step.

4. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B: Go to step  6

   A: Go to Next Step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. See DATA LIST / ACTIVE TEST 
   2. See TERMINALS OF ECU 
6. ADJUST, REPAIR OR REPLACE 
7. CONFIRMATION TEST