Transmission Wire: Installation

INSTALL TRANSMISSION WIRE
1. Coat a new O-ring with ATF WS and install it to the transmission wire.
  
  Fig 1: Locating Transmission Wire Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pass the transmission wire through the transaxle.
  
  Fig 2: Identifying Transmission Wire Of Transaxle
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the transmission wire with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
INSTALL TRANSMISSION VALVE BODY ASSEMBLY (See INSTALLATION )
INSTALL VALVE BODY OIL STRAINER ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY (See INSTALLATION )

Fig 3: Locating Transaxle Case Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BATTERY CARRIER (See INSTALLATION )
INSTALL BATTERY (See INSTALLATION )
ADD AUTOMATIC TRANSAXLE FLUID
INSPECT AUTOMATIC TRANSAXLE FLUID (See AUTOMATIC TRANSAXLE FLUID )
INSTALL ENGINE UNDER COVER LH