Park / Neutral Position Switch: Removal

1. REMOVE BATTERY  (See REMOVAL )
2. REMOVE BATTERY CARRIER  (See REMOVAL )
3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY 
   1. Remove the nut and disconnect the control cable assembly from the control shaft lever.
      Fig 1: Locating Control Shaft Lever Nut

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the clip and disconnect the control cable assembly from the control cable bracket.
4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 

1. Disconnect the connector from the park/neutral position switch assembly.
2. Remove the nut, washer and control shaft lever.
   Fig 2: Locating Control Shaft Lever

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Unstake the lock plate and remove the manual valve shaft nut.
   Fig 3: Removing Manual Valve Shaft Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 bolts and pull out the park/neutral position switch assembly.

Fig 4: Locating Park/Neutral Position Switch Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002