Typical Enabling Conditions
The following conditions are common to Condition (A) and (B).
TYPICAL ENABLING CONDITIONS
| The monitor runs whenever the following DTCs are not present. | None |
| ATF temperature sensor (TFT sensor) circuit | No circuit malfunction |
| ECT (Engine Coolant Temperature) sensor circuit | No circuit malfunction |
| IAT (Intake Air Temperature) sensor circuit | No circuit malfunction |
| Electronic Throttle Control System (if applicable) | No circuit malfunction |
Condition (A):
TYPICAL ENABLING CONDITIONS
| Time after engine start | 18 minutes and 20 seconds or more |
| Driving distance after engine start | 5.6 mile (9 km) or more |
| Accumulated driving time | 4 minutes and 10 seconds or more |
| ECT | -15°C (5°F) or more |
| IAT (12 seconds after engine start) | -10°C(14°F) or more |
| ECT (12 seconds after engine start) | -10°C (14°F) or more |
Condition (B):
TYPICAL ENABLING CONDITIONS
| ECT (Current temperature) | 60°C (140°F) or more |
| ECT (12 seconds after engine start) | Less than 35°C (95°F) |
| ATF temperature (12 seconds after engine start) | 100°C(212°F) or more |