LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY 
    1. Position the front shock absorber assembly level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
      NOTE:
      • The gas is colorless, odorless, and non-poisonous.
      • Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
        Fig 1: Identifying Drill Hole Mark Area
        G06013616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals