Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs are not present | P0010 (VVT Camshaft timing oil control valve) P0011 (VVT System 1 - Advance) P0012 (VVT System 1 - Retard) P0031, P0032 (Air fuel ratio sensor heater - Sensor 1) P0102 - P0103 (Mass air flow meter) P0110 - P0113 (Intake air temperature sensor) P0115 - P0118 (Engine coolant temperature sensor) P0125 (Insufficient engine coolant temperature for Closed Loop) P0171, P0172 (Fuel system) P0300 - P0304 (Misfire) P0335 (Crankshaft position sensor) P0340 (Camshaft position sensor) P0351 - P0354 (Igniter) P0500 (Vehicle speed sensor) P2196 (Air fuel ratio sensor - rationality) P2A00 (Air fuel ratio sensor - slow response) |
| Battery voltage | 11 V or more |
| Either of following conditions 1 or 2 is met: | - |
| 1. All of following conditions met: | - |
|
-15 to 7°C (5 to 45°F) |
|
-10 to 56°C (14 to 133°F) |
|
-10 to 56°C (14 to 133°F) |
| 2. All of following conditions met: | - |
|
More than 7°C (45°F) |
|
56°C (133°F) or less |
|
-10°C (14°F) or more |
| Accumulated time at 80 mph (128 km/h) or more of vehicle speed | Less than 20 seconds |