LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Power Door Lock Control System >> Data List / Active Test

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. Read the Data List according to the display on the Techstream.

    Main Body 

    DATA LIST REFERENCE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Key Unlock Warning SW Unlock warning switch signal/ON or OFF ON: Key is in ignition key cylinder
    OFF: No key is in ignition key cylinder
    -
    D Door Courtesy SW Driver door courtesy light switch signal/ON or OFF ON: Driver door is OPEN
    OFF: Driver door is CLOSED
    -
    P Door Courtesy SW Front passenger door courtesy light switch signal/ON or OFF ON: Front passenger door is OPEN
    OFF: Front passenger door is CLOSED
    -
    RR Door Courtesy SW Rear right door courtesy light switch signal/ON or OFF ON: Rear right door is OPEN
    OFF: Rear right door is CLOSED
    -
    RL Door Courtesy SW Rear left door courtesy light switch signal/ON or OFF ON: Rear left door is OPEN
    OFF: Rear left door is CLOSED
    -
    Back Door Courtesy SW Back door courtesy light switch signal/ON or OFF ON: Back door is OPEN
    OFF: Back door is CLOSED
    -
    D-Door Lock Pos SW Driver door lock position switch signal/ON or OFF ON: Driver door is unlocked
    OFF: Driver door is locked
    -
    P-Door Lock Pos SW Front passenger door lock position switch signal/ON or OFF ON: Front passenger door is unlocked
    OFF: Front passenger door is locked
    -
    Door Lock SW-Lock Door control switch lock signal/ ON or OFF ON: Door control switch is pushed to lock position
    OFF: Door control switch is not pushed to lock position
    -
    Door Lock SW-Unlock Door control switch unlock signal/ ON or OFF ON: Door control switch is pushed to unlock position
    OFF: Door control switch is not pushed to unlock position
    -
    Door Key SW-Lock Front door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF ON: Front door key cylinder is turned to lock position
    OFF: Front door key cylinder is turned to unlock position
    -
    Door Key SW-Unlock Front passenger door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF ON: Front passenger door key cylinder is turned to unlock position
    OFF: Front passenger door key cylinder is turned to lock position
    -
    D Door Key SW-UL Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF ON: Driver door key cylinder is turned to unlock position
    OFF: Driver door key cylinder is turned to lock position
    -
    Unlock Key Twice Key-linked 2-step unlock function/ ON or OFF Customized value displayed -
    Auto Lock/Shift Shift-linked automatic door lock function/ON or OFF Customized value displayed -
    Auto Unlock/Shift Shift-linked automatic door unlock function/ON or OFF Customized value displayed -
    All Unlock/Open-Close Driver door-linked automatic door unlock function/ON or OFF Customized value displayed -
  2. ACTIVE TEST 

    HINT:

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Active Test.
    5. Perform the Active Test according to the display on the Techstream.

    Main Body 

    ACTIVE TEST REFERENCE

    Tester Display Test Part Control Range Diagnostic Note
    Door Lock Door lock motor LOCK/UNLOCK -
    D-Door Unlock Driver side door lock motor ON/OFF -