Stereo Component Amplifier: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See AIRBAG SYSTEM ).
REMOVE OUTER SEAT TRACK COVER (w/o Seatback Board)
HINT:

Use the same procedure for the RH side and the LH side (See REMOVAL ).
REMOVE INNER SEAT TRACK COVER (w/o Seatback Board)
HINT:

Use the same procedure for the RH side and the LH side (See REMOVAL ).
REMOVE FRONT SEAT ASSEMBLY (w/o Seatback Board)
HINT:

Use the same procedure for the RH side and the LH side (See REMOVAL ).
REMOVE OUTER SEAT TRACK COVER (w/ Seatback Board) (See REMOVAL )
REMOVE INNER SEAT TRACK COVER (w/ Seatback Board)
for 2WD: (See REMOVAL )

for 4WD: (See REMOVAL )
REMOVE FRONT SEAT ASSEMBLY (w/ Seatback Board) (See REMOVAL )
REMOVE AUDIO AMPLIFIER COVER
1. Disengage the 2 clips and remove the audio amplifier cover.
  
  Fig 1: Identifying Audio Amplifier Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Disconnect each connector.
2. Remove the 2 bolts and stereo component amplifier assembly.
  
  Fig 2: Identifying Stereo Component Amplifier Assembly And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002