Amplifier Antenna: Installation

1. Engage the 2 claws and install the amplifier antenna assembly.
   Fig 1: Identifying Amplifier Antenna Assembly Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Place the antenna cord in the cutout of the antenna nut.
3. Install the amplifier antenna assembly with the antenna nut.

   Torque: 4.5 N*m (45 kgf*cm, 40 in.*lbf) 

   Fig 2: Identifying Cutout Of Antenna Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Engage the 4 clamps.
   Fig 3: Identifying Antenna Wire Clamps

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the roof antenna pole by turning it in the direction of the arrow shown in the illustration.

HINT:

Refer to the procedures from Install Roof Headlining Assembly (See INSTALLATION ).

Fig 4: Installing Roof Headlining Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002