LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Transmission >> Transfer Case -JF2A >> 4WD Control Ecu >> Removal

4WD Control Ecu: Removal

  1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION  (See REMOVAL )
  2. REMOVE LOWER INSTRUMENT PANEL PAD SUBASSEMBLY RH  (See REMOVAL )
  3. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE COWL SIDE TRIM BOARD RH  (See REMOVAL )
  6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See ON-VEHICLE INSPECTION )
  7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB  (See REMOVAL )
  9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL  (See REMOVAL )
  10. REMOVE 4WD CONTROL ECU 
    1. Disconnect the 2 ECU connectors.
    2. Remove the bolt and ECU.
    Fig 1: Identifying ECU Connector With Bolt
    G05629742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals