LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Oil Pressure Sensor >> Removal

Oil Pressure Sensor: Removal

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH  (See REMOVAL )
  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH  (See REMOVAL )
  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY 
    1. Disconnect the sender gauge connector.
      Fig 1: Identifying Sender Gauge Connector
      G05153079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the oil pressure sender gauge.
      Fig 2: Locating Oil Pressure Sender Gauge
      G05153080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals