Air Injection Driver: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY
1. Remove the bolt and disconnect the ground wire.
2. Disconnect the wire harness clamp.
  
  Fig 1: Identifying Ground Wire And Wire Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the 4 air injection control driver connectors.
  
  Fig 2: Locating Air Injection Control Driver Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 3 bolts and air injection control driver.
  
  Fig 3: Locating Air Injection Control Driver Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002