Door Control Transmitter: Installation

INSTALL TRANSMITTER BATTERY
1. Install the battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.
  NOTE:
  - Do not bend the transmitter battery electrode during insertion.
  - Keep the transmitter cover interior free of dust and oil.
  Fig 1: Locating Transmitter Battery
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transmitter housing cover by pressing down on it as shown in the illustration.
  
  Fig 2: Installing Transmitter Housing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Insert the Emergency key into the transmitter.
  
  Fig 3: Inserting Mechanical Key Into Transmitter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Press one of the transmitter switches and check that the LED illuminates.