Inspection Procedure
HINT:
After the inspection is completed, clear the DTCs (See DTC CHECK/CLEAR ).
NOTE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the radio receiver.
- CLEAR DTC
- Clear the DTCs (See DTC CHECK/CLEAR ).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble code is output.
OK: No DTC is output.
NG: REPLACE RADIO RECEIVER ASSEMBLY (See REMOVAL )
OK: END
- Recheck for DTCs and check if the same trouble code is output.