Navigation Ecu: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

Fig 1: Locating No. 1 Disc Player Bracket & Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL NO. 2 DISC PLAYER BRACKET 
   1. Align the protrusions of the bracket, labeled A, with the indentations of the navigation module board.
   2. Install the bracket with the 2 screws labeled B.

      Torque: 3.0 N.m (30 kgf*cm, 26 in.*lbf) 

   Fig 2: Locating No. 2 Disc Player Bracket & Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL NO. 1 DISC PLAYER BRACKET 
   1. Align the protrusions of the bracket, labeled A, with the indentations of the navigation module board.
   2. Install the bracket with the 2 screws labeled B.

      Torque: 3.0 N.m (30 kgf*cm, 26 in.*lbf) 

   Fig 3: Locating No. 1 Disc Player Bracket & Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NAVIGATION MODULE BOARD WITH DISC PLAYER BRACKET 
   1. Connect the navigation module board connectors.
   2. Install the navigation module board with disc player bracket with the nut and 2 screws.

      Torque: for Nut 

      12 N.m (122 kgf*cm, 8 ft. lbf) 

   3. Attach the clamp.
4. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL  (See INSTALLATION )
5. INSTALL INSTRUMENT PANEL BOX DOOR KNOB  (See INSTALLATION )
6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
   Fig 4: Locating Navigation Module Board Connectors & Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL FRONT DOOR SCUFF PLATE RH  (See INSTALLATION )
8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
9. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See INSTALLATION )
10. INSTALL INSTRUMENT SIDE PANEL RH  (See INSTALLATION )
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
12. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (See INSTALLATION ).