LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Circuit Tests And Service Information >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 nuts and accelerator pedal.
      Fig 1: Locating Accelerator Pedal Nuts
      G05628237Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals