LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> FJ Cruiser RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER  (See REMOVAL  )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the mass air flow meter.
      Fig 1: Identifying Mass Air Flow Meter
      G05197997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals