LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Transfer Case -VF2A >> Transfer Indicator Switch >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT TRANSFER INDICATOR SWITCH (for 4WD Position) 
    1. Measure the resistance of the switch.
      Fig 1: Identifying Transfer Indicator Switch Connector Terminal (For 4WD)
      G05112316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TRANSFER INDICATOR SWITCH (FOR 4WD POSITION)

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the switch.

  2. INSPECT TRANSFER INDICATOR SWITCH (for 4L Position) 
    1. Measure the resistance of the switch.

      Standard resistance 

      TRANSFER INDICATOR SWITCH (FOR 4L POSITION)

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher
      Fig 2: Identifying Transfer Indicator Switch Connector Terminal (For 4L Position)
      G05112316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the switch.

  3. INSPECT TRANSFER INDICATOR SWITCH (for Neutral Position) 
    1. Measure the resistance of the switch.
      Fig 3: Identifying Transfer Indicator Switch Connector Terminal (For Neutral Position)
      G05112316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TRANSFER INDICATOR SWITCH (FOR NEUTRAL POSITION)

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the switch.

scientia non olet · About LEMON Manuals