Transmission Control Cable: Installation

INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
1. Connect the control cable to the transmission with the nut and a new clip.
  Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
  
  Fig 1: Identifying Control Cable Nut And Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the control cable to the body with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 2: Identifying Control Cable Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the 3 claws to connect the control cable.
  
  Fig 3: Identifying Control Cable Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the control cable to the body with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 4: Identifying Control Cable Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the control cable with a new lock clip.
Fig 5: Identifying Control Cable Lock Clip
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT CONSOLE BOX (See INSTALLATION )
REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See INSTALLATION )
REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY (See INSTALLATION )