Speed Sensor: Installation

INSTALL TRANSMISSION REVOLUTION SENSOR
1. Coat 2 new O-rings with Toyota Genuine ATF WS or equivalent and install one onto each transmission revolution sensor.
  
  Fig 1: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 transmission revolution sensors with the 2 bolts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 2: Identifying Transmission Revolution Sensors Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 transmission revolution sensor connectors.