Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present. | P0500: VSS P0748 - P0799: Trans solenoid (range) |
|---|---|
| Shift change | Each shift change is completed before starting next shift change operation |
| ECM selected gear | 4th or 5th |
| Output shaft rpm | 1,000 rpm or more |
| Park/neutral position switch | OFF |
| R switch | OFF |
| L switch | OFF |
| Engine | Running |
| Ignition Switch | ON |
| Starter | OFF |