Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using pliers, install the cooler dryer onto the modulator.
  
  Fig 1: Identifying Cooler Dryer Onto Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
  Compressor oil:
  
  ND-OIL 8 or the equivalent
  
  Fig 2: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a 14 mm straight hexagon wrench, install the cap onto the modulator.
  Torque: 2.9 N*m (30 kgf*cm, 25 in.*lbf)
  
  Fig 3: Identifying Cap Onto Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002