Blower Unit: Disassembly

REMOVE AIR INLET CONTROL SERVO MOTOR
1. Remove the 2 screws and remove the air inlet control servo motor.
  
  Fig 1: Identifying Air Inlet Control Servo Motor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BLOWER MOTOR
1. Remove the 3 screws and the blower motor.
  
  Fig 2: Identifying Blower Motor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BLOWER RESISTOR
1. Remove the 2 screws and the blower resistor.
  
  Fig 3: Identifying Blower Resistor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLEAN AIR FILTER SUB-ASSEMBLY
1. Disengage the 2 claws and remove the air filter.
  
  Fig 4: Identifying Air Filter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AIR REFINER ELEMENT
1. Remove the air refiner element.
  
  Fig 5: Identifying Air Refiner Element
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002