Engine Cooling System: Fan: Installation

INSTALL FAN
1. Install the fan onto the coupling with the 4 nuts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  Fig 1: Identifying Coupling Fan Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN SHROUD (See INSTALLATION )
INSTALL RADIATOR SUPPORT SEAL UPPER (See INSTALLATION )
INSTALL NO.1 ENGINE UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL V-BANK COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 ft.*lbf)