LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Removal

Combination Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE LH 
    1. Disengage the 14 claws and remove the front door scuff plate.
    Fig 1: Identifying Front Door Scuff Plate Claws
    G05580990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT FLOOR FOOTREST  (See REMOVAL )
  4. REMOVE FOOTREST CLIP  (See REMOVAL )
  5. REMOVE COWL SIDE TRIM BOARD LH 
    1. Remove the clip.
    2. Disengage the 2 claws and remove the cowl side trim board.
    Fig 2: Identifying Cowl-Side Trim Board Claws
    G05580991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE INSTRUMENT PANEL GARNISH LH  (See REMOVAL )
  7. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  8. REMOVE HOOD LOCK CONTROL LEVER SUBASSEMBLY  (See REMOVAL )
  9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  10. REMOVE INSTRUMENT CLUSTER FINISH PANEL  (See REMOVAL )
  11. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws.
      Fig 3: Identifying Combination Meter Screws
      G05580992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 connectors and clamp and remove the combination meter.
      Fig 4: Identifying Combination Meter Connectors
      G05580993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals