Inspection Procedure

1. Check if the DTC(s) relating to the speed sensor circuit is output (See DTC CHECK/CLEAR  ).

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   DTC not output	A
   DTC output	B

B: REPAIR SPEED SENSOR CIRCUIT 

A: Go to next step 

1. Check tire size and condition of all 4 wheels.

   OK: 

   All 4 wheels are the same size and in the same condition. 

NG: REPLACE TIRES SO THAT ALL 4 TIRES ARE SAME IN SIZE 

OK: Go to next step 

1. Clear the DTC (See DTC CHECK/CLEAR  ).
2. Drive the vehicle at more than 13 mph (20 km/h) for more than 60 seconds.
3. Check if the same DTC is detected (See DTC CHECK/CLEAR  ).

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   DTC output	A
   DTC not output	B

B: END 

A: REPLACE MASTER CYLINDER SOLENOID  (See DISASSEMBLY )