Radio Receiver: Installation

INSTALL RADIO RECEIVER ASSEMBLY
1. Connect the plug, the head unit connector and the 2 radio connectors.
  
  Fig 1: Identifying Head Unit And Radio Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
  Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf)
INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)