Torque Specifications
Transfer oil
TORQUE SPECIFICATIONS CHART
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| No. 1 transfer case plug (for filler and drain) | 37 | 377 | 27 |
Transfer case oil seal
TRANSFER CASE OIL SEAL - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Lower transfer case protector x Transfer assembly | 18 | 183 | 13 |
Extension housing oil seal
EXTENSION HOUSING OIL SEAL - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Lower transfer case protector x Transfer assembly | 18 | 183 | 13 |
Transfer assembly
TRANSFER ASSEMBLY - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Transfer case plug x Front transfer case | 19 | 190 | 14 |
| Transfer oil pump body subassembly x Front transfer case | 7.5 | 76 | 66 in.*lbf |
| Transfer oil separator subassembly x Front transfer case | 7.5 | 76 | 66 in.*lbf |
| No. 1 transfer case plug (for filler and drain) | 37 | 377 | 27 |
| Transfer shift fork shaft plug | 19 | 190 | 14 |
| Rear transfer case x Front transfer case | 28 | 285 | 21 |
| Transfer extension housing subassembly x Rear transfer case | 12 | 122 | 9 |
| Transfer output shaft companion flange (for front and rear) | 118 | 1, 203 | 87 |
| Transfer control shift lever retainer sub-assembly x Front transfer case | 18 | 183 | 13 |
| Transfer case cover subassembly x Front transfer case | 18 | 183 | 13 |
| Transfer bearing retainer subassembly x Front transfer case | 12 | 117 | 8 |
| Transfer indicator switch x Front transfer case | 37 | 377 | 27 |
| Transfer assembly x Transmission assembly | 24 | 244 | 17 |
| Lower transfer case protector x Transfer assembly | 18 | 183 | 13 |
Speedometer driven gear
SPEEDOMETER DRIVEN GEAR - TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Vehicle speed sensor x Transfer extension housing sub-assembly | 12 | 122 | 9 |