Rear Upper Control Arm: Installation

TEMPORARILY TIGHTEN REAR UPPER CONTROL ARM
1. Install the upper control arm and temporarily tighten the nut, washer and bolt.
  
  Fig 1: Identifying Rear Upper Control Arm Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the upper control arm and temporarily tighten the nut, washer and bolt.
STABILIZE SUSPENSION
1. Jack down the vehicle.
2. Bounce the vehicle up and down several times to stabilize the suspension.
FULLY TIGHTEN REAR UPPER CONTROL ARM
1. Fully tighten the 2 nuts.
  Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
  
  HINT:
  
  While fixing the bolt, turn and install the nut.
  
  Fig 3: Identifying Rear Upper Control Arm Nut And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002