Front Stabilizer Bar: Installation

1. Install the 2 stabilizer bar bushes onto the stabilizer bar.

   HINT:

   • Install the bush onto the outer side of the bush stopper on the stabilizer bar.
   • Install the bush so that the protrusion faces inner side of the vehicle.
     Fig 1: Identifying Stabilizer Bar Link

     Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

   Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

   Fig 2: Identifying Stabilizer Bracket RH Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the stabilizer link with the 2 nuts.

   Torque: 70 N*m (714 kgf*cm, 52 ft.*lbf) 

   HINT:

   If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

   Fig 3: Identifying Stabilizer Link Assembly RH Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

The installation procedure for the RH side is the same as that for the LH side.

Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf) 

Torque: 112 N*m (1, 137 kgf*cm, 82 ft.*lbf)