Purge Valve: Installation

INSTALL DUTY VACUUM SWITCHING VALVE
1. Connect the hose to the vacuum switching valve.
2. Install the vacuum switching valve with the bolt.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  Fig 1: Identifying Vacuum Switch Valve With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the vapor feed hose.
  
  Fig 2: Identifying Vapor Feed Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the connector.
INSTALL V-BANK COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)