Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS
| Either of following conditions 1 or 2 met | - |
| 1. Frequency that both of following conditions (a) and (b) met | 5 times or more |
| (a) Engine rpm - Target engine rpm | Less than -100 rpm, or more than 200 rpm |
| (b) Vehicle condition | Stop after vehicle was driven by 6 mph (10 km/h) or more |
| 2. Frequency that both of following conditions (c) and (d) met | Once |
| (c) Engine rpm - Target engine rpm | Less than -100 rpm, or more than 200 rpm |
| (d) IAC flow rate learning value | 7 L/sec. or less, or 1.1 L/sec. or more |