LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> EFI Relay >> Inspection

EFI Relay: Inspection

  1. INSPECT EFI RELAY 
    1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Specified Condition
      1E-7 - 1E-12 10 kΩ or higher
      1E-7 - 1E-12 Below 1 Ω (Battery voltage is applied between terminals 1E-9 and 1E-10)
      Fig 1: Identifying EFI Relay Terminals
      G04973399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals