LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE AIR CLEANER INLET ASSEMBLY  (See REMOVAL )
  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
      2. Fig 1: Locating Camshaft Position Sensor
      G04973355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and camshaft position sensor.
scientia non olet · About LEMON Manuals