Front Speed Sensor: Installation

1. Install the front speed sensor with the bolt.

   Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   NOTE:

   • Prevent foreign matter from attaching to the sensor tip.
   • Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
   Fig 1: Identifying Speed Sensor Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the front speed sensor with the 2 bolts and engage the 2 claws.

   Torque: Bolt A 

   5.0 N*m (51 kgf*cm, 44 in.*lbf) 

   Bolt B 

   19 N*m (194 kgf*cm, 14 ft.*lbf) 

   NOTE: Do not twist the wire harness for the front speed sensor when installing the speed sensor.
   Fig 2: Locating Front Speed Sensor And Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the front speed sensor connector and clamp.
Fig 3: Locating Front Speed Sensor Connector And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 103 N*m (1, 050 kgf*cm, 76 ft.*lbf) 

HINT:

Refer the procedures up to "ELECTRONICALLY CONTROLLED BRAKE SYSTEM". (See TEST MODE PROCEDURE )