LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Hybrid >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control - Hybrid >> Abs Main Relay >> Inspection

Abs Main Relay: Inspection

  1. INSPECT ABS MAIN RELAY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE REFERENCE

      Tester Connection Condition Specified Condition
      3-5 Always 10 kΩ or higher
      3-5 Apply B+ between terminal is 1 and 2 Below 1 Ω
      Fig 1: View Of ABS Main Relay
      G05011367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the value is not as specified, replace the ABS MAIN relay.

scientia non olet · About LEMON Manuals