LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Hybrid >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/Window Glass (Hybrid) >> Power Window Control System >> Front Passenger Side Power Window Switch Power Source Circuit >> Inspection Procedure

Inspection Procedure

  1. CHECK WIRE HARNESS (POWER WINDOW REGULATOR SWITCH - BATTERY AND BODY GROUND) 
    1. Disconnect the H6 connector.
    2. Measure the voltage according to the value (s) in the table below.

      Standard voltage 

    VOLTAGE SPECIFICATION

    Tester Connection Condition Specified Condition
    3 (B) - Body ground Power switch on (IG) 10 to 14 V
    Fig 1: Identifying H6 Power Window Regulator Switch Connector
    G05014890Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE 

scientia non olet · About LEMON Manuals