General Maintenance

HINT:

Inspect these items on a cooled down engine.

1. INSPECT DRIVE BELT 
   DRIVE BELT REFERENCE CHART
   
   

   Type	See procedures
   2AZ-FE	See INSPECTION
   2GR-FE	See INSPECTION

2. REPLACE ENGINE OIL AND OIL FILTER 
   ENGINE OIL AND OIL FILTER REFERENCE
   
   

   Type	See procedures
   2AZ-FE	See ON-VEHICLE INSPECTION
   2GR-FE	See ON-VEHICLE INSPECTION

3. REPLACE ENGINE COOLANT 
   ENGINE COOLANT REFERENCE
   
   

   Type	See procedures
   2AZ-FE	See ON-VEHICLE INSPECTION
   2GR-FE	See ON-VEHICLE INSPECTION

4. INSPECT EXHAUST PIPES AND MOUNTINGS 
   1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
5. INSPECT SPARK PLUGS 
   SPARK PLUGS REFERENCE
   
   

   Type	See procedures
   2AZ-FE	See ON-VEHICLE INSPECTION
   2GR-FE	See ON-VEHICLE INSPECTION

6. INSPECT BATTERY 
   BATTERY REFERENCE
   
   

   Type	See procedures
   2AZ-FE	See ON-VEHICLE INSPECTION
   2GR-FE	See ON-VEHICLE INSPECTION

7. INSPECT AIR CLEANER FILTER 
   1. Remove the air filter.
   2. Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.
      Fig 1: Cleaning Air Cleaner Filter

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Reinstall the air filter.
8. REPLACE AIR CLEANER FILTER 
   1. Replace the air filter with a new one.
9. INSPECT FUEL TANK CAP GASKET 
   FUEL TANK CAP REFERENCE
   
   

   Type	See procedures
   2AZ-FE	See ON-VEHICLE INSPECTION
   2GR-FE	See ON-VEHICLE INSPECTION

10. INSPECT FUEL LINES AND CONNECTIONS AND FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS 
    1. Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
11. INSPECT CHARCOAL CANISTER 
    CHARCOAL CANISTER REFERENCE
    
    

    Type	See procedures
    2AZ-FE	See INSPECTION
    2GR-FE	See INSPECTION

12. INSPECT VALVE CLEARANCE 
    VALVE CLEARANCE REFERENCE
    
    

    Type	See procedure
    2AZ-FE	See VALVE CLEARANCE