Fuel Pump: Reassembly

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
1. Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the fuel pressure regulator.
  
  Fig 1: Identifying Fuel Pressure Regulator O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push in the fuel pressure regulator to the fuel filter.
  
  Fig 2: Identifying Fuel Pressure Regulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP
1. Apply a light coat of gasoline or grease to the O-ring of the fuel pump.
2. Push in the fuel pump to the fuel filter.
  
  Fig 3: Identifying Fuel Pump
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP HARNESS
1. Connect the connector (*1).
2. Install the fuel pump harness (*2).
  
  Fig 4: Locating Fuel Pump Harness And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY
1. Connect the fuel pump connector (*1).
2. Install the fuel suction plate.
  
  Fig 5: Locating Fuel Suction Plate And Fuel Pump Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Slide the fuel sender gauge to engage with the claw (*1).
2. Connect the fuel sender gauge connector (*2).
  
  Fig 6: Sliding Fuel Sender Gauge To Engage With Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP CUSHION RUBBER
1. Install the fuel pump cushion rubber to the fuel pump.
  
  Fig 7: Locating Fuel Pump Cushion Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 FUEL SUCTION SUPPORT
1. Install the No. 2 fuel suction support.
  
  Fig 8: Locating Fuel Suction Support
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002