LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/Window Glass (Except Hybrid) >> Rear Power Window Switch >> Inspection

Rear Power Window Switch: Inspection

  1. INSPECT POWER WINDOW SWITCH (for Rear RH) 
    1. Remove the power window switch.
    2. Measure the resistance when the switch is operated according to the value(s) in the table below.
      Fig 1: Identifying J1 Connector Terminals
      G04981101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Standard resistance 

    POWER WINDOW SWITCH (FOR REAR RH)

    Tester Connection Switch Condition Specified Condition
    1 (D)-2 (SD) UP Below 1 Ω
    3 (B)-4 (U) Below 1 Ω
    1 (D) - 2 (SD) OFF Below 1 Ω
    4 (U) - 5 (SU) Below 1 Ω
    4 (U)-5 (SU) DOWN Below 1 Ω
    1 (D)-3 (B) Below 1 Ω
  2. REMOVE POWER WINDOW SWITCH (for Rear LH) 
    1. Remove the power window switch.
    2. Measure the resistance when the switch is operated according to the value(s) in the table below.
      Fig 2: Identifying K1 Connector Terminals
      G04981102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Standard resistance 

    POWER WINDOW SWITCH (FOR REAR LH)

    Tester Connection Switch Condition Specified Condition
    1 (D)-2 (SD) UP Below 1 Ω
    3 (B)-4 (U) Below 1 Ω
    1 (D) - 2 (SD) OFF Below 1 Ω
    4 (U) - 5 (SU) Below 1 Ω
    4 (U) - 5 (SU) DOWN Below 1 Ω
    1 (D) - 3 (B) Below 1 Ω
scientia non olet · About LEMON Manuals